Specificaties Lengthening conveyor
Various:
1. Rack conveyor; a rack conveyor could be used for lengthening
the conveyor.
2. Extra double strainer; these could be mounted everywhere under
the conveyor
3. Extra emergency button complete with cable; these could be mounted
on each place of the conveyor, or has to be used when the conveyor
is not complete with rackstation (on the sorting unit there is standard
mounted an emergency button).
4. Extra pair of legs; could be used by a curve, when the curve is placed
in the middle of the conveyor.
5. Pre-rinse insert; this is needed when there is a pre-rinsemachine placed
between the conveyor. ATTENTION! A pre-rinsemachine is something
completely different as the pre-rinse unit as mentioned in this pricelist.
6. Bandage cleaning sprayer; a bandage cleaning sprayer is always
mounted at the beginning of the conveyor and has to be used when the
conveyor is not foreseen of a pre-rinse unit or if there is an accelerator
unit placed before the pre-rinse unit so that the bandage before the
accelerator unit would not be cleaned by the pre-rinse unit.
7. Non left-over unit; a non left-over unit is mounted in the sortingunit
instead of a basketprofile. The non left-over unit is complete with sprayer
for cleaning the inside of pans and bins.