Specificaties Pre-Rinse insert
1. Rack conveyor; a rack conveyor could be used for lengthening the conveyor.
2. Extra double strainer; these could be mounted everywhere under the conveyor
3. Extra emergency button complete with cable; these could be mounted on each
place of the conveyor, or has to be used when the conveyor is not complete with
rackstation (on the sorting unit there is standard mounted an emergency button).
4. Extra pair of legs; could be used by a curve, when the curve is placed in the middle
of the conveyor.
5. Pre-rinse insert; this is needed when there is a pre-rinsemachine placed between the
conveyor. ATTENTION! A pre-rinsemachine is something completely different as the
pre-rinse unit as mentioned in this pricelist.
6. Bandage cleaning sprayer; a bandage cleaning sprayer is always mounted at the
beginning of the conveyor and has to be used when the conveyor is not foreseen of
a pre-rinse unit or if there is an accelerator unit placed before the pre-rinse unit so
that the bandage before the accelerator unit would not be cleaned by the pre-rinse unit.
7. Non left-over unit; a non left-over unit is mounted in the sortingunit instead of a
basketprofile. The non left-over unit is complete with sprayer for cleaning the inside
of pans and bins.